Ciscoworks Prime LMS 4.2 DFM change of fault threshold

Below is an example of what I have to do to get rid of tons of OutOfRange Temperature o rVoltage Sensors Alerts:

First Stop daemon

  /etc/init.d/dmgtd stop

Modify the entry (please note the highlighted part)for my devices in oid2type_cisco.conf file (<NMSROOT>/objects/smarts/conf/discovery/oid2type_cisco.conf)  as shown below:

# Cisco Nexus 7000

 .1.3.6.1.4.1.9.12.3.1.3.612 {

    TYPE = Switch

    VENDOR = Cisco

    MODEL = N7K-C7010

    CERTIFICATION = CERTIFIED

    CONT = Cisco-EntityRF-Switch

    HEALTH = Nexus-Entity-EntSensor

    BRIDGE = Cisco

    NEIGHBOR = Cisco-Cdp

INSTRUMENTATION:

     Environment                     = CiscoEntityFRU:DeviceID

    Card-Fault                      = CiscoEntityFRU:DeviceID

    CPU/Memory                      = CiscoSystem:DeviceID

     Interface-Fault                 = MIB2

    Interface-Performance           = MIB2

    Port-Fault                      = MIB2

    Port-Performance                = MIB2

}

# Cisco ASR Router - 1004

.1.3.6.1.4.1.9.1.924 {

TYPE = Router

VENDOR = Cisco

MODEL = ASR1004

CERTIFICATION = TEMPLATE

CONT = Cisco-EntityFRU

NEIGHBOR = Cisco-Cdp

HEALTH = Cisco-Router-CRS-EntSensor

INSTRUMENTATION:

Environment = CiscoEntityFRU:DeviceID

CPU/Memory = CiscoRouter:DeviceID

Card-Fault = CiscoEntityFRU

Interface-Fault = MIB2

Interface-Performance = CiscoRouter

Interface-Ethernet-Performance = CiscoRouter_Ethernet

} 

# Cisco VSS Switch 

.1.3.6.1.4.1.9.1.896 {

    TYPE = Switch

    VENDOR = Cisco

    MODEL = VSS-1440

    CERTIFICATION = CERTIFIED

    CONT = Cisco-VSS-Switch

    VLAN = Cisco-Membership

    BRIDGE = Cisco

    NEIGHBOR = Cisco-Cdp

    HEALTH = Cisco-Router-CRS-EntSensor

INSTRUMENTATION:

    Environment                         = CiscoEntityFRU:DeviceID

    CPU/Memory                          = CiscoRouter:DeviceID

    Card-Fault                          = CiscoEntityFRU:DeviceID

    Interface-Fault                     = MIB2

    Interface-Performance               = MIB2

    Port-Fault                          = MIB2

    Port-Performance                    = MIB2

    Port-Ethernet-Performance           = dot3_Ethernet

}

Restart daemon

  /etc/init.d/dmgtd start

Re-discover the devices